亚游国际官网:一扇铜门必须除锈才能上油漆 - 山东铜门制造

亚游国际官网

网站关键词: 山东铜门提醒你铜门刷漆需要注意的问题 工程铜门1 工程铜门 沈阳老菜馆 济南机场路
当前所在位置:首页>>常见问题>>一扇铜门必须除锈才能上油漆常见问题

一扇铜门必须除锈才能上油漆

来源: 日期:2019-06-21 发布人:admin浏览次数:
  很多人会选择铜门,由于铜门具有十分优越的防盗才能,而且外观也十分美观大气,铜门厂家在制造铜门的时分也运用了一定的技巧。
  Many people will choose the copper door, because the copper door has a very superior anti-theft ability, and the appearance is very beautiful atmosphere, the copper door manufacturer in the manufacture of the copper door also used a certain skill.
  铜厂的规范做法是:目前国内涂料之前,绝大多数的门的防盗,酸洗磷化过程中,由于构造的复杂性的防盗门,主要由热管,热轧,锻造和冷板直接焊接在一同,招致一些艰难喷雾,所以早期的除油除锈是仿铜过程的关键一步,假如这一步是不处置好,几年后还会掉粉油漆,影响美丽的铜厂。
  The standard practice of copper factory is: before the current domestic paint, most of the door's anti-theft and pickling phosphating process, due to the complexity of the structure of the security door, mainly by the heat pipe, hot rolling, forging and cold plate directly welded together, leading to some difficult spray, so the early removal of oil and rust is a key step in the process of imitation copper, if this step is not disposed of, a few years later, it will also drop powder paint, affect the United States. Li's copper factory.
  山东铜门
  Tongmen, Shandong Province
山东铜门
  假如我们想把铁门做成黄铜门,我们的一步是除去上面的锈,在一层防锈漆上,涂上黄铜金粉。待它晾干后用沾上黑色亚光漆的刷子在门上刷,不过不要全部刷黑色,同时也不能太规则。这是一种常见的相似铜的过程,任何制造商都能够做到。如今青铜国内制造商普通防盗涂料之前,酸洗磷化过程,由于平安闸门构造十分复杂,通常与热管,热轧钢板和锻造冷板焊接的零件,很难喷雾,所以在油漆用于除油除锈停止铜是十分重要的,假如不做这一步,一段时间后将油漆,这青铜漂亮水平将遭到影响。
  If we want to make iron doors into brass doors, our first step is to remove the rust on them and coat them with brass and gold powder on a layer of anti-rust paint. When it dries, brush the door with a brush coated with black matte paint, but don't brush it all black, and it can't be too regular. This is a common copper-like process that any manufacturer can do. Nowadays, before the ordinary anti-theft coating made by bronze manufacturers in China, the process of pickling and phosphating is very complicated. Because the structure of the safety gate is very complex, it is difficult to spray the parts usually welded with the heat pipe, hot rolled steel plate and forging cold plate. Therefore, it is very important to use the paint to remove the oil and rust and stop the copper. If we do not do this step, the bronze will be affected after a certain period of time.
  以上就是山东铜门厂家为大家整理的相关内容,希望能帮到大家,我们的网站是http://www.jnxmt.com
  Above is the relevant content of Shandong Tongmen factory for you, hope to help you, our website is http://www.jnxmt.com.
新闻资讯
-News and information-
在线客服
  • 点击这里给我发消息
二维码

亚游国际官网:扫描二维码

亚游国际官网-亚洲最佳游戏平台